How to Deal With Double Glazed Repair
It is recommended to have your double-glazed window frames regularly inspected, especially when they are expanding or shrinking. This will decrease the chance of draughts.
If you notice condensation between the glass panes, the seal could be failing and should be replaced. Replacing the seal will not only help to reduce condensation, but also help to reduce the cost of energy.
Cracked or broken panes
Double glazing isn't indestructible. It can develop defects that could decrease the efficiency of energy. Repairing double glazing is a straightforward process, but the proper tools and knowledge are required to perform quality repairs. It is recommended to hire a professional company to complete the task rather than trying it yourself.
The most common fault that affects a double-glazed window is a cracked or broken pane. This could be a result of a blow or knock on the frame from outside, or from an attempt to open the window that is shut. The glass could crack or break into small pieces, depending on the size of the crack and the force that is applied to it.
You can repair a double-glazed glass window susceptible to cracking by using special tape or putty. This will prevent the crack from expanding or getting worse. It will block any water, wind or other elements from entering your home through the cracks.
Condensation in double-glazed windows is a different issue that is common and is usually caused by a failure of the window seal. It is a natural process that can occur due to varying temperatures and weather conditions, therefore it is essential to ensure whether your windows are under warranty before attempting to repair them.
Typically, this will be covered by the company that you purchased your double glazing from so it is important to contact them immediately and explain the issue clearly. It is recommended to do this in writing rather than by phone or text message Keep an original copy of the correspondence.
If you're interested in trying to fix and fix a window that has become misty yourself, a typical method is to drill through the middle of the damaged pane. The desiccant will absorb moisture and help to solve the problem. However it is temporary solution, and it is recommended to have your double-glazed windows replaced with new windows as soon as you can.
Misted Panes
Double glazed windows that mist up can be a huge issue and cause major disruptions in your home. Once you identify the cause, it's relatively simple to repair. Most of the time the problem is due to a problem in the seals that separate your window panes. This allows moisture get into. Poor installation or drainage issues, or even faulty seals by the window manufacturer can cause this problem.
Standard sealed units comprise of two glass panes with a hollow spacer bar inserted between them (shown in the above image). The inner face of this spacer bar is perforated and the bars are filled with a desiccant that is used to absorb any moisture that gets into the unit. The two glass panes are joined and the entire unit is filled with gas to improve its thermal efficiency.
As you can imagine, if the sealed unit is damaged, moisture may be trapped between the panes, causing condensation and mist. This could also result in the heat from your home being lost which could result in a significant amount of money being lost in energy costs.
Repairing a window that has been misted is a challenging task that shouldn't be attempted by someone who doesn't have a solid understanding in the glazing and construction industries. If you are willing to take on the challenge, it is possible to repair the misted seal of a window by adding moisture-absorbing desiccant to the space between the glass panels.
Remember that this is only a temporary fix, and the condensation may return. The process will need to be repeated. It's much more efficient to replace the misty unit. It's also more efficient and cleaner. A replacement will bring back the original insulation to your home and is not achievable by repairing. We suggest getting in touch with a reputable double-glazing company if you're having trouble with condensation and misted windows. While you wait, keep your windows as dry and clean as you can.
Water Leaks
Whether they are new or old, double glazed windows must not leak. Leaking windows aren't only an inconvenience but can cause significant damage to your home such as the development of mold and structural damage as well as higher heating and cooling expenses. Contact a professional window company as soon as you notice a problem.
Window leaks are usually indications of a problem with the seals that connect the panes of glass. If you notice condensation between the panes, it's a sure sign that the window seal has deteriorated and that moisture is getting into the insulation gap between the glass. Although a small amount of condensation is normal, if it persists and becomes visible on the interior or exterior of your house, it's time to call an repair service.
Water collecting at the bottom of your window frame is a common reason for leaks. This could be a sign of drainage holes that are blocked or flashing that is not properly installed or a sloped sill. It is easy to clean out a clogged drain hole using a coat hanger. Improper flashing is also easy to fix using roofing caulk to fill the gaps in the frame. A faulty pitch could be the cause of a window sill that slopes to one side. A professional window repair service will be able identify the cause of the issue and provide an affordable, quick solution.
It is not unusual for UPVC windows that are older to leak or break. However, it is more cost-effective and efficient to employ a double glazing repair service. They can restore the look and function of your windows to what they were like when they were new. They can also replace hinges, handles, and locks, if needed. Professional window repair companies will offer you a guarantee for their work. You would not get this if you were to fix windows yourself.
It is difficult to open
If you find that your windows are becoming harder to open, you should contact the company that sold you the windows. In the majority of instances, a simple repair will resolve the issue. If the issue persists and you are unable to resolve it, you should consider replacing your windows with new contemporary designs. Double-glazed windows with modern designs offer the most recent features to keep your home safe and warm. These include slimline uPVC frames or aluminium frames with advanced insulation that prevents heat from escape and cutting-edge security hardware.
Condensation between the glass panes is a common sign that double glazing requires repair. This is caused by an issue with the seals between the two panes. Inert gas is supposed get into the glass and replace it with moist air, making sure that your windows remain well-insulated and thermally efficient. If this isn't happening, the seals could have degraded or simply broken down in some way, which may happen over time as a result of weather changes or other elements.
A draught coming from your double-glazed window also a common sign that the seals have failed, indicating that cold air is getting into your home. This could also lead to higher energy costs since your heating system will have to work harder to keep the temperature in your home.
In some instances, a draught can be fixed by lubricating hinges, handles, or mechanisms on your double-glazed doors or windows. It is important to remember that this is only a temporary solution and you will have to seek out the experts when the issue persists.
You can also add ventilation, such as air bricks, extractors or vents in your doors and windows to alleviate condensation issues. It is also important to allow your double-glazed windows and doors to breathe by keeping them open to the maximum extent possible. This can be double glazing repairs accomplished by trickle vents.